|
|
Caldwell Pipe
Pick ™ Model CPP |
|
The Caldwell Model CPP Pipe Pick ™ is simple and fast
to use. No need for the rigger to reach inside the pipe. Worker
remains above the pipe at all times. Conforms to applicable
standards so you are in conpliance with OSHA.
How to Use:
Insert the Caldwell Pipe Pick ™ into the lifting hole in the pipe, then
tilt the pick to engage the beveled edge—and lift up! Now,
you can lift and set the pipe. Once the pipe is set, simply
lower the Pipe Pick ™, the counterweighted lift arm then automatically
falls straight and the Pipe Pick ™ can be removed. Next!! |
|
|
|
|
|
|
Price |
Add to Cart |
CPP-1.5 |
7/16" |
1.5 tons |
10 |
$ 861 |
|
|
CPP-1.5 Pipe Pick | ID: 65-251
- Rated Capacity: 3,000 lbs.
- Lifting Arm: 10.5" x 1.5"
- Minimum hole diameter to insert lifter: 2.13"
- Minimum Pipe ID: 12"
- Overall length (insert / remove position): 23"
- Overall length (lifting position) 16.25"
- Lifting shackle: 1.62" x 2.37 x .62"
Complies with ASME B30.20, BTH-1,
Design category B, Service Class 0.
Patent No. 5,820,186
Normally in stock.
If out of stock at time of order, lead time up to 4 weeks |
|
|
|
|
|
|
|
CPP-3 |
9/16" |
3 tons |
18 |
$ 947 |
|
|
CPP-3 Pipe Pick | ID: 65-252
- Rated Capacity: 6,000 lbs.
- Lifting Arm: 12" x 1.75"
- Minimum hole diameter to insert lifter: 2.50"
- Minimum Pipe ID: 14"
- Overall length (insert / remove position): 27.62"
- Overall length (lifting position) 20"
- Lifting shackle: 1.93" x 2.93 x .75"
- Estimated unit weight: 18 lbs
Complies with ASME B30.20, BTH-1,
Design category B, Service Class 0.
Patent No. 5,820,186
Normally in stock.
If out of stock at time of order, lead time up to 4 weeks
|
|
|
|
|
|
|
|
CPP-5 |
3/4" |
5 tons |
38 |
$ 1,257 |
|
|
CPP-5 Pipe Pick | ID: 65-253
- Rated Capacity: 10,000 lbs.
- Lifting Arm: 13" x 2.25"
- Minimum hole diameter to insert lifter: 3.25"
- Minimum Pipe ID: 16"
- Overall length (insert / remove position): 43.5"
- Overall length (lifting position) 36"
- Lifting shackle: 2.75" x 3" x 1"
- Weight: 38 lbs.
Complies with ASME B30.20, BTH-1,
Design category B, Service Class 0.
Patent No. 5,820,186
Normally in stock.
If out of stock at time of order, lead time up to 4 weeks
|
|
|
|
|
|
|
|
|
|
Prices subject to change without notice.
Minimum Order U.S.A. and Canada: $150 | Minimum Order International: $250
Terms and Conditions
|
|
Contact Us Form
805-647-4792 Office | 805-256-6477 Fax
|
|
|
|
|
www.P65Warnings.ca.gov.
CA Prop 65 Warnings
WARNING: This product can expose you to steel parts,
chemicals, minerals, nickel, chromium, cadmium, lead and
compounds, magnesium, aluminum, carbon black, crude oil,
toluene, benzene, gasoline, diesel fuels, other petroleum products,
which is known to the State of California to cause cancer birth
defects or other reproductive harm.
For more information go to www.P65Warnings.ca.gov
|
|
Copyright
© 2003 - 2021 All Rights Reserved: Construction And Rigging Supply,
Inc.
1427 Los Angeles Avenue, Ventura, CA
93004 |
805-647-4792 Office | 805-256-6477 Fax |
|